Symmetrical Personal Training is the first Personal Training Center in Cyprus offering the highest quality and latest technology machines HYPOXI and ICOONE for targeted fat loss together with the POWER PLATE.
WEICON Contact Cyanoacrylate Adhesives are cold curing one-component adhesives, free of solvents. They quickly polymerize by reacting with moisture both on the surfaces to be bonded and from the air, and cure under light pressure. They will bond within seconds almost all materials to and among each other, such as:
Natural and synthetic rubber
When using WEICON Contact Cyanoacrylate Adhesives, unlike in the case of welding and soldering, surfaces remain unaltered. No material stress occurs. Thus, more simple and rapid assembly is often possible, and auxiliary fixing devices are not necessary. The resulting advantages are numerous:
Enormous time and, therefore, cost savings
Immediate on-processing of fi xed parts possible
High bond strength up to material fracture
Clean and optically appealing bondings
WEICON Contact Cyanoacrylate Adhesives provide high structural strength, with a temperature resistance from -50°C to up to +135°C and good levels of resistance to a lot of chemicals. In many instances, the cured bond joint proves to be harder than the material of the bonded parts (material fracture). A wide range of product types is available for a variety of applications. The types differ chemically and by their viscosity.
Ethyl ester based types
Due to the size of the molecules and the resulting anchoring points positioned far from each other, a higher elasticity of the bond joint is achieved. These types are recommended for bonding plastics and rubber.
Alkoxy ethyl based types
Also with adhesives on this basis there is flexibility concerning the curing due to the similar molecule structure. However, its particular characteristic is its low odor and, therefore, user-friendly process ability especially with assembly line manufacturing. When cured, they are less sensitive to humidity and should be applied in those instances where the white "blooming" of the bond line is not tolerated for optical reasons.
Methyl ester based types
Due to their small molecule structure and closely positioned anchoring points, these types are less flexible after curing. Therefore, they offer particularly good application possibilities for bonding metals.
Continuous development and adaptation to the latest demands based on practical experience and the environment guarantee, furthermore, constantly high quality standards.
Important Note: All specifications, recommendations and techncial data are based on laboratory tests under optimum conditions resp. on practical experience. They have been compiled most carefully. Nevertheless, a claim cannot be derived from them. We therefore recommend to carry out own tests before application. The user bears the only responsibility for non-appropriate or other than specified applications.